Kits are limited. Order early.
Skill Level: Intermediate, must have soldering experience.
Zoom: 1 session, Sunday - June 9 , 10am- 2pm EST
Zoom: An invitation to the Zoom meeting will be emailed 3 days before class and will be required to register with Zoom to gain access.
Recording will be available for 3 months after the class for both Zoom and Hybrid participants and will be available on a private YouTube channel.
Written instructions will be emailed to each registrant prior to class.
Description: Not all settings can be on a flat surface. In this Zoom, I will demystify settings that are built on a curve.
Materials Kit: Enough material for 1 ring (SS stock, textured ring stock, gemstone, CZ's). Please indicate in the comments at check out your stone choice.
Domestic Shipping included. There is an additional charge for International shipping.
***Kits will ship May 27, 2024.
*You will need the following tools to complete the project.
• Sharpie
• Chain nose pliers
• Round nose pliers
• Nylon pliers (optional)
• Parallel pliers (optional)
• Bow closing pliers (optional but recommended)
• Fine tweezers
• Bench block
• Rawhide mallet
• Chasing hammer (optional)
• Student files (to include a half round file)
• Needle files
• Hollow scraper (optional)
• Curved Burnisher
• Bezel Rocker
• Jewelers’ saw & 2/o saw blades
• Cut lube
• Bench pin
• Brass brush (optional)
• Fine tweezers
• Euro lustre & muslin wheel (optional)
• Carbon ring mandrel and stand
• Super grip gloves (optional)
• Solder pick with shield (optional)
• Steel ring mandrel (stepped mandrel preferred)
• Soldering set up
• Magnifying glasses (as needed)
• Flex shaft with polishing wheels and polishing compound.
• Center punch
• Brass brush
• Setting burnisher set
• Liver of sulfur or BlackMax (optional)